Complete Engine Rebuilding Service
Our Name Says It All!
phone: (718) 328-1544
phone: (718) 328-1544
fax: (718) 328-1545
fax: (718) 328-1545
We Offer Quality Remanufactured Engines
DON’T FORGET
WE INSTALL AS WELL AS BUILD
PROPER INSTALLATION & TUNE-UP IS JUST AS IMPORTANT AS THE TOP QUALITY ENGINE YOU HAVE JUST PURCHASED—
SO DO YOURSELF A BIG FAVOR
LET THE PRO’S DO IT!
FROM THE TIME YOU PLACE YOUR ORDER ALLOW 24 HOURS FOR DELIVERY. (Engines Only)
FROM THE TIME YOUR VEHICLE IS BROUGHT TO US FOR ENGINE AND INSTALLATION, ALLOW
4 WORK DAYS FOR COMPLETION (Engine and Installation)
FOR INSTALLATIONS:
Radiator Check is included with the job. Hoses, Belts, Options that are faulty will be replaced
and you will be charged only for the part. The Labor Is Free.
• All our blocks are tested, inspected for
line bore, and corrected if necessary.
• All cylinders are bored .020-.030
• All balanced, matched sets of pistons
are used
• All chrome or moly rings are installed
• All connecting rods are expertly
remanufactured
• All remanufactured crankshafts are used
• All new bearings and gaskets are used
• All cam bearings are replaced new
• All new camshafts are installed
• All new 3 pc. timing sets are installed
• All new high volume oil pumps are
installed
• All new freeze out and cam plugs
• All new seals and gaskets are used
• All heads are tested, surfaced, valve
seats checked and replaced where
necessary
• Valve guides are either knerled or
replaced
• All valve spring tension is carefully
checked
• All new shims and keys are used
• 3 angle cuts are used on all jobs and
valves are replaced where necessary
• All new valve seals are installed
line bore, and corrected if necessary.
• All cylinders are bored .020-.030
• All balanced, matched sets of pistons
are used
• All chrome or moly rings are installed
• All connecting rods are expertly
remanufactured
• All remanufactured crankshafts are used
• All new bearings and gaskets are used
• All cam bearings are replaced new
• All new camshafts are installed
• All new 3 pc. timing sets are installed
• All new high volume oil pumps are
installed
• All new freeze out and cam plugs
• All new seals and gaskets are used
• All heads are tested, surfaced, valve
seats checked and replaced where
necessary
• Valve guides are either knerled or
replaced
• All valve spring tension is carefully
checked
• All new shims and keys are used
• 3 angle cuts are used on all jobs and
valves are replaced where necessary
• All new valve seals are installed
Engines
All the above is done by expert machinists and assemblers and double checked by supervisors to eliminate any possible errors. Our factory is open for your inspection anytime you wish to visit.
‘we have nothing to hide’
lnk